Dometic CS200VS Manual de usuario descargar pdf (Pagina 8)

- 8 -

Attach the drip tray on the back. The

screws are already attached at the back.

ELECTRICAL CONNECTION

The electrical installation must be carried out cor-

rectly, taking into account all relevant regulations

and codes of practice. The wine cellar operates on

a mono-phased alternating current.

Please check that the voltage shown on the data

plate corresponds to your power supply.

The wine cellar must be earthed.



earthed socket. Dometic and its subsidiaries will

not be held responsible for any incident due to non-



Electrical leads must be routed and secured so

that they cannot come into contact with hot or

sharp parts of the wine cellar.

Remove the transport pallet on which your

wine cellar rests.

Adjust the feet to allow a 30 mm clear-

ance under the wine cellar and verify

that it stands in a vertical position in both

directions. If necessary, use a spirit level.

Attach the distance bar using the two

screws at the top back on each side of the

cellar. The bar ensures the correct distance

to the wall behind.



your wine cellar far away from any source

of heat, e.g. radiator, cooker or intense

sunlight.



the top left corner inside the wine cellar.

-



WARNING

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Sin comentarios

Dometic CS200VS Manual de usuario Pagina 8