13. Putting into operation
Technical data:
13.1. Connecting to electrical mains
The appliance may only be operated from
nominal voltage mains as shown on the data
plate. The appliance mains plug may be connected to
a mains socket earthed in accordance with regulations.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
The manufacturer declines any liability should
these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance
rating plate.
9
14. Environmental
protection information
The appliance does not contain any CFCs/HCFCs.
Ammonia (natural hydrogen and nitrogen
compound) is used as a refrigerating agent in the
refrigeration unit.
The ozone-friendly cyclopentane is activated as a
blowing agent for the PU foam insulation.
Sodium chromate is used for corrosion protection
(less than 2 % weight of the coolant).
15. Recycling
After unpacking the appliance, the packing
materials should be delivered to a local collection
site. At the end of its useful lifetime, the appliance
should be delivered to a specialized collection and
reprocessing firm, which reclaims the usable
materials. The rest is properly destroyed.
This appliance complies with the following
directives:
ANSI/UL STD: 250
CAN/CSA - C22.2 No. 63 - 93
Model DS 200 DS 300 DS 400 DS 600
Type DS20-60 DS20-60 DS20-60 DS20-60
Gross volume 22,5 litre 28,1 litre 36,7 litre 52,6 litre
Mains operation 110 V (AC) 110 V (AC) 110 V (AC) 110 V (AC)
Input 65W 65W 65W 85W
Energy consumption 0.74 kWh/24h 0,76 kWh/24h 0.8 kWh/24h 0.88 kWh/24h
Climate class SN SN SN SN
Absorber Solution 147g H
2
O + 98 g NH
3
151g H
2
O + 101 g NH
3
151g H
2
O + 101 g NH
3
157g H
2
O + 105 g NH
3
Comentarios a estos manuales