Dometic 3200 Series Manual de instrucciones descargar pdf (Pagina 34)

Operating the roof air conditioner Dometic FreshJet

9.7 Setting the temperature

Cooling Mode

In the “Automatic” ( ), “Cooling” ( ), and “Dehumidifying” ( ) modes, you

can specify a temperature between 16 °C and 31 °C via the remote control.

➤ Use the + or – button to select the desired temperature.

✓ The roof air conditioner confirms the receipt of the values with a high note.

✓ The temperature is set on the roof air conditioner.

Heating Mode (available for models with heating only)

In the “Automatic” ( ) and “Heating” ( ) modes, you can specify a temper-

ature between 16 °C and 31 °C via the remote control.

➤ Use the + or – button to select the desired temperature.

✓ The roof air conditioner confirms the receipt of the values with a high note.

✓ The temperature is set on the roof air conditioner.

9.8 Adjusting the air nozzles

The air supply within the vehicle can be regulated by setting the air nozzles

(fig. 5, page 6).

➤ Chillout ADB: Turn the slats (1) in the air nozzles in the required direction

using the thumb wheel (2).

➤ Design ADB: Turn the slats (1) in the air nozzles in the required direction.

9.9 Setting the timer

The timer function allows you to set a specific time period for air conditioning.

You can specify the switch-on time, the switch-off time or both values. The

time can be set in 10 minute increments.

➤ Before programming the timer, select the air conditioning mode and all

required values (e.g. temperature).

NOTE

The remote control returns to its initial mode if no button is

pressed on the remote control for 15 seconds while programming

the timer.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 45 46

Sin comentarios

Dometic 3200 Series Manual de instrucciones Pagina 34